Description

Stryker 40-liter Insufflator 

Stryker 40-Liter insufflator provides superior performance with unprecedented safety and reliability. This insufflator is designed to handle the needs of today’s dynamic surgical environment. Its ability to maintain pneumoperitoneum under the most extreme conditions, coupled with a multitude of safety features, place the stryker 40-liter insufflator in a class by itself. 

The 40-liter insufflator provides a host of features including: 

• The highest new rate available on the market 

• Neonatal mode offers increased sensitivity and flow rates as low as .1 liters per minute 

• LCD Display provides surgeons with ongoing status messages 

• Sidne compatibility allows the surgeon to control the insufflator with voice commands 

• Software driven to allow for future upgrades 

• Built in gas heating technology 

• Video on-screen display 

Safety 

• Surgivent-electronic venting system for added safety 

• Visual and audible warning signals 

• Safety retter valve 

• Internal Leakage Detection 

Description 

Stryker’s 40-liter insufflator maintains pneumoperitoneum under extreme conditions for reliability during all laparoscopic procedures.

Stryker’s 40-liter insufflator combines exceptional performance and safety. The insufflator is designed to handle the needs of today’s dynamic surgical environment. Its ability to maintain pneumoperitoneum under the most extreme conditions for reliability during all laparoscopic procedures. In neonatal mode it offers increased sensitivity for pediatric patients.     
As an accessory, the Ultra Flow version of the Plume-Away Lap S.E.S provides continuous removal of smoke produced by electrocautery, laser and ultrasonic surgical devices during laparoscopic procedures.

Introduction/Basics 

This device has to be serviced every two years. The chapter Function Test describes this routine inspection. 

Please use the maintenance and checklist included in the back of the service manual to document the bi-annual inspection. 

1-4 Testing tools and resources 

The following tools and resources are required to perform the maintenance and service tasks described in this manual. Please make sure that all tools and resources are calibrated and in perfect working order before commencing any service or maintenance tasks. 

• Manometer Range 0-70 mm Hg

Test Class 1.0

• Manometer Range 0-7 bar,

Test Class 1.6

• Manometer Range 0-100 bar, 

Test Class 1.6 

• Silicone Tube 8x2mm 

• PVC Tube 6x4mm, 1m 

• T Connector 8-8-8 mm 

• Flow Column Range 0-20 l/min CO2

Max. Pressure Drop at 9 l/min < 10 mbar 

• Veress Hollow Needle 

Length 100mm, 

Opening Diameter 1.4 mm, 

Inner Diameter 1.6 mm

• Heater 

Calibration Box T100/T101

• Universal Multimeter